The Arriflex SR3 Advanced is one of the most modern Super 16 cameras made. Extremely quiet and lightweight, it's ideal for run-and-gun scenarios and shoots up to 75fps. This version of the camera has a Hyper II HD video tap to monitor sharp, crystal clear images as well as record HD video dailies with an optional on-board monitor recorder. This camera has also been modified to include a Gold Mount to accept Gold Mount batteries.

The Ratworks Screw-In 19mm Cube Bar Extension (2.5") is a screw in bar with a 3/8″ UNC male thread on one end, and a female thread on the other. This allows the bars to be extended, and for items such as cinetape horns to be mounted to the ends of them. The threaded end features a cross-drilled hole and two flats, that allow either a 4mm Allen key or spanner to be used to tighten them.

Use this ARRI Bridge Plate Adapter BPA-6 as a support for your small and lightweight cinema camera, such as the ALEXA 35, to support an ARRI studio bridge plate or dovetail interface on the BUD-1. This compact plate features an optically centered 15mm LWS rod block and a small shoulder pad, which allow you to quickly balance, mount, and unmount the camera for different rig setups. It also features a "Touch and Go 35" snap-plate compatible with ARRI bridge plates such as the BP-8 and BP-9.

The ARRI FE-2 Viewfinder Extension is 7.5" long and equipped with a magnification adjustment of 10x to 17x. This is activated by turning the lever. 

The Elokuvakonepaja ARRI SR3 Power Adapter (Gold Mount) allows you to use any gold mount battery with the ARRI SR3 film camera. Batteries can have any input between 10-32V DC. The adapter has an output of 26.4V DC max 150W. G-mount Adapter has two additional outputs, one D-tap and 2-pin LEMO (Please note, these outputs put out the same power as the battery connected).

The Visual Products SR3 HD Hyper Tap II is the High Definition Video Assist solution for all SR3 cameras. With this video tap there is no need to source and purchase additional hard-to-find/no-longer-manufactured parts in order to add an HD video assist to your SR3 camera. Whether your SR3 has the video handle/optics elbow, the Arri IVS system or no video tap at all, the Visual Products SR3 HD Hyper Tap II video assist can be fitted to your camera.

The R005 Aluminum Universal Top Handle from UURig attaches to your camera or cage's shoe mount, providing a comfortable grip and multiple accessory mounts for your DSLR, camcorder, or mirrorless camera. Constructed from anodized aluminum, this cheese plate handle features ten 1/4"-20 and five 3/8"-16 threads, plus three cold shoe mounts. Its knurled hexagonal knob provides quick, easy mounting on your camera or rig.

The Tilta 12” Lightweight ARRI Standard Dovetail Plate can be used directly on the OConnor 2060, 2575, and 120ex and Sachtler Cine 30 Fluid Heads.

Visual Products manufactures this lightweight lens rod support bracket for your Arriflex 16 SRI, SRII & SR3 camera. A precisely machined lightweight 15mm rod setup that provides a strong platform for your matte box, follow focus, zoom motors or other lens accessories. The new SR Lens Rod Bracket utilizes carbon fiber lens rods which reduce the weight of the bracket without compromising strength. The rods are held in the bracket by two nylon-tipped set screws. This system makes it easy to change the rods for use with different length lenses. The nylon tips of the set screws hold the rods firmly in place without damaging the carbon fiber (Note: if you put enough effort in, it is possible to damage carbon fiber even with a nylon-tipped screw)

The Wicam Mini Power Box is a professional power distributor. The box has 8 sockets for connection, 2 of which are 12V outputs, and the other 6 are pass-through. As well as a power signal, the splitter also passes a "Rec-Stop" signal through itself for remote control of Arri cameras. There are standard 1/4 UNC 20 threads with "Arri location points" on board.
Comes complete with Cine Lock and PBMA adapters.

This Arri 16 SR 3 camera case from Innerspace Cases holds the camera, eyepiece extender, AJA Box, battery converter and accessories.

The Analog Steadi Plate is from Standard Camera is compatible with the ARRIFLEX 416, ARRIFLEX SR3, and Aaton Xtera. Unibody construction machined from a single piece of aircraft grade 6061 Aluminum. Package includes a slotted 3/8” tie down and a 5/16” locking pin.

Visual Products coiled 3-pin Fischer to 4-Pin Hirose cable to power HD Tap.