The versatile Ronin 2 gimbal from DJI is suitable for use handheld, or mounted in a variety of ways, including to a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. This means it can be used for everything from DSLRs up to cinema cameras such as the Arri Alexa Mini and Sony FS7.

Like its predecessor, the Ronin 2 features support for Underslung, Upright, and Briefcase operation modes to help you achieve the best angle. However, it has been redesigned to enable easy transition between Upright and Underslung modes without changing the position of the camera. It also offers a number of other improvements, in particular, enhancements to the control software and physical design to simplify taking complex shots without sacrificing performance, all while making important functions more readily accessible.

Use the DJI Extended Top Cross Bar to mount a camera to the Ronin 2.

The Universal Mount from CineMilled is designed to be used with the DJI Ronin 2 gimbal to mount it on a tripod, Steadicam, car mount, or cable cam. It is compatible with the Mitchell threaded collar and castle nut, Mitchell washer and knob, Steadicam arm post adapter, and the PRO-Ring system. There are 1/4"-20 and 3/8"-16 standard threaded holes all over the mount, plus a few non-threaded positions. A safety locking pin system is included to provide safety until you latch down and secure the dovetail.

The DJI Ronin 2 Dual TB50 Battery Mount is a replacement for the dual mount that comes included with the gimbal. It attaches to the Ronin 2 and plugs into dedicated contacts to support up to two TB50 batteries with hot-swapping. It can also be connected from a distance using optional long DC power cables from DJI

The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. Four Intelligent Flight Batteries can be placed in the Charging Hub at once, and a maximum of two batteries will be charged at a time. The battery pair with more stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence according to battery power levels from high to low, if batteries are not paired. Pairing can be carried out using the DJI GO 4 app. The Micro USB port is used for firmware updates.

The DJI Camera Base Plate for Ronin 2 is the standard-length camera plate for attaching your camera to the DJI Ronin 2 gimbal.

The Ronin 2 Accessory Mount utilizes a quick-release design allowing tool-free installation of itself onto the Ronin 2 Grip. The Accessory Mount comes with a 1/4" screw at the center of the top surface, one 3/8"-16, two 1/4"-20, and four M4 screw holes to mount compatible accessories such as universal arms, wireless video transmitters, or field monitors.

Simply use the included 3/8-16 tie down knob to thread into any of the CineMilled Universal mounts and quickly and easily mount your gimbal mount or accessories to any Mitchell base.

The DJI Top Mounting Block for Ronin 2 replaces the center handle on the Ronin 2 gimbal grip. In its place, it provides 1/4"-20 and M4 threaded holes for attaching top handles and various other accessories. The threaded holes are reinforced for more secure attachment of your accessories.

To install the Focus system and other accessories, attach the 15mm Focus Rod and Mount to the camera, then mount the camera onto the Ronin 2.

The ARRI Alexa Mini Power Cable powers an ARRI Alexa Mini camera by connecting the BAT port on the camera to the 14.4V Accessory Power Port on Ronin 2's tilt axis.

The ARRI ALEXA Mini Start/Stop Cable for Ronin 2 from DJI, 15.7" long, allows for record start/stop control of the camera from the Ronin 2 gimbal. It connects to the EXT port on the camera and the RSS port on the Ronin 2 Power Hub.

Use this Multi-Tool from DJI to mount other devices and accessories onto the Ronin series gimbals, including the Ronin-SC, Ronin-2, Ronin-S, Ronin-MX, Ronin-M, and Ronin.

The 60mm Tilt Axis Extender for Ronin 2 from DJI allows you to increase the height of the gimbal's tilt axis to make more space for taller cameras. A pair of extension blocks with mounting hardware is included to let you raise the height by 2.4".

The detachable design offers increased flexibility with a greater tilt movement range by allowing you to remove the bottom half of the Grip. This also allows the Grip to be broken down into an easy to transport size. When connected with the Quick Connect for Ready Rig, markers on either sides of the Grip serve as reference tick marks for easier vertical positioning.

The DJI TB50 Intelligent Flight Battery is a replacement battery for your Inspire 2 quadcopter and is also compatible with the Ronin 2 gimbal. Like the battery that came with your Inspire 2, this is a 4280mAh, lithium-ion polymer (LiPo) battery that yields between 25 and 27 minutes of flight time, depending on conditions and which Zenmuse system you use.

Use the MotionBlock when shooting at high-speeds for improved gimbal performance.

The Ronin 2 Remote Controller controls gimbal movement and switches between operating modes.

Recharge your TB50 intelligent flight battery and other TB50 charging accessories with the DJI TB50 AC Power Adapter. This adapter plugs into any available AC outlet to recharge a single TB50 intelligent flight battery in approximately 1.5 hours. The adapter can also provide power to your TB50 Battery Charging Hub and TB50 Charging Adapter.

Quickly move your camera between the Ronin 2 and a tripod, stabilizer, slider, dolly, or other mount using this Quick Switch Mount Plate from CineMilled. The quick-release plate accommodates the proprietary Ronin 2 factory dovetail plate and allows you to quickly mount and remount your camera elsewhere. The mount features a locking lever to secure the plate and a safety button to prevent sliding. Multiple 3/8"-16 and 1/4"-20 threads on the bottom provide several mounting options.

The DJI Triple D-Tap Breakout Box for Ronin 2 is designed to be used with the optional DJI Power Hub. Connected to the 14.4V port on the Power Hub, it provides three D-Tap ports for use in your Ronin 2 gimbal workflow. The breakout cable length is 7.9".

The DJI Ronin 2 Power Hub connects to the pogo-pin interface on the Ronin 2 and provides four ports for accessories, data, and camera control. Three ports allow you to power accessories at 14.4V as well as transmit data, and an RSS port lets you connect a compatible camera and trigger record start/stop using the Ronin 2 remote controller or mobile app. Optional proprietary control cables are required for connecting the camera. The four ports are provided in a rear-facing position to prevent cable connectors from interfering with other accessories.

The Watertight Protective Case from DJI keeps the Ronin 2 stabilizer safe during transport. A built-in air pressure equalizer keeps air pressure within the case like the external environment, enhancing water-resistant performance and making the top lid easy to open even after changes in air pressure during transportation. The protective case comes with a high-density foam insert for the Ronin 2 and associated accessories. It features five locking latches, integrated wheels, and a retractable extension handle makes it easy to transport.

The DJI UART to D-Bus Cable for Ronin 2 allows you to connect the Ronin 2 gimbal to a compatible Futaba receiver. It plugs into the UART port on the Ronin 2 and the D-Bus port on the Futaba receiver.