The ARRI ALEXA 35 is the smallest fully featured ARRI production camera ever, packing the features and processing power of a larger ALEXA into a Mini-sized body that can record native 4K at up to 120 fps. Fast and easy operation is assured through numerous usability improvements and a simple menu structure that will be intuitively familiar to crews. ALEXA 35 is the best A-camera, B-camera, and action camera on the market, all rolled into one.

ALEXA 35 raises the bar even higher with a new Super 35 format 4.6K sensor, 17 stops of dynamic range, and REVEAL Color Science.

Offering simultaneous use of its high-resolution OLDED viewfinder and its 4" flip-out monitor, the ARRI ALEXA Mini LF Multi Viewfinder MVF-2 is truly a multifunctional unit. Two control dials (one on each surface of the monitor) enable the MVF-2 to be used on either side of the camera, providing the operator or assistant control as best suits your shot. Both the OLED EVF and the monitor feature upgrades from the MVF-1, including the ability to detach the eyepiece from the monitor unit.

Add power outputs to your ALEXA 35 cinema camera with this ARRI Power Distribution Module PDM-1. The module mounts directly onto the back of the camera without the use of additional cables, and it is powered by a separately available nested B-mount battery adapter that passes power through to the module and the camera. The low-profile module provides four 3-pin 24 VDC outputs, two 2-pin 12 VDC outputs, and one 12 VDC twist D-Tap output.

Use this Direct Connect Helix Battery Plate from Core SWX to power an ARRI Alexa 35 camera using a Core Helix Max high-capacity Gold mount battery pack. The plate provides 20 to 34 VDC input and output, and it mounts directly onto the back of the camera after removing the original B-mount plate. The plate can be used along with the ARRI PDM-1 and AEM-1 modules.

A lens mount specifically designed for large format and/or full frame lenses with an LPL (Large Positive Lock) mount. Compatible with ARRI LDS-2 and Cooke /i. Short code: LPL/M-ALM/AMI. Can be equipped with the PL-to-LPL Adapter to accept PL mount lenses. Includes LBUS connector for cforce-type lens motors. Fits ALEXA Mini LF, ALEXA Mini and AMIRA cameras, but only ALEXA Mini LF and ALEXA Mini support the LBUS connector.

An adapter that can be used to attach PL mount lenses to a camera with an LPL mount. Compatible with ARRI LDS-1 and Cooke /i. Short code: LPL/M-PLA.

The ARRI Balance Utility Dovetail BUD-1 is a thin, lightweight plate designed to mount under the ALEXA 35 cinema camera to facilitate mounting on a variety of bridge plates and dovetail accessories. It provides additional balancing and is compatible with the BPA-6 shoulder pad bridge adapter and other bridge plates, SAM plates, and shoulder pad rigs.

The ARRI Viewfinder Mounting Bracket VMB-5 is designed to mount a viewfinder onto your ARRI camera and provide a longer extension than standard viewfinder mounts. Its friction clamp provides quick and easy 360° rotation by using a simple thumbscrew. The VMB-5 is compatible with all ARRI viewfinder extension brackets and viewfinder adapters. The bracket requires the SAS-1 Square Accessory Sleeve for attachment to a camera.

The ARRI Center Camera Handle CCH-5 mounts onto the top of your camera using the optional LMS-4 low-mode support plate and provides a comfortable, stable top handle for the ALEXA 35 cinema camera. The full-size handle mounts quickly and easily without tools using a large captive thumb lever. It is compatible with various gimbal top plates and provides multiple accessory threads to mount front/rear HEB/HEX handle extensions, VF mounting brackets, rod mounts, and more.

Extend your ALEXA 35 rig to add more accessories with this ARRI Top Extension Bracket TEB-1. The bracket attaches to the Low Mode Support LMS-4 or Universal Adapter Plate UAP-3 to extend the mounts so you can add accessories like the Rear Accessory Bracket RAB-2 or the Articulated Mounting Plate AMP-1. The bracket does not obstruct any of the camera's top ventilation.

The ARRI Low Mode Support Plate LMS-4 is a top plate designed for the ALEXA 35 cinema camera for use in handheld and low-mode mounting scenarios. The LMS-4 features an updated quick release system that provides easy mounting and unmounting of the CCH-5 top handle without using any tools. It features 15mm rod clamps for optional standard 15mm rods, allowing you to mount a variety of accessories such as a motor or an EVF using the MVB-1 mounting bracket. It can also be extended using the TEB-1 top extension bracket.

Mount your VMB-5 viewfinder bracket onto your ALEXA 35 cinema camera rig with the ARRI Square Accessory Sleeve SAS-1. This square mount is shaped so the optional VMB-5 bracket doesn't fall when loosening and adjusting. It mounts onto any plate, accessory, or cage with two M4 threads that are 20mm apart, such as the CCH-5 center top handle.

Mount a variety of accessories to the left side of your ALEXA 35 cinema camera without obstructing any ports or buttons using this ARRI Camera Side Bracket CSB-1L. The bracket mounts onto the left side of the camera and provides multiple 1/4"-20, 3/8"-16, and M4 accessory threads and a standard ARRI rosette for a handle or extension.

The ARRI Articulated Mounting Plate AMP-1 provides accessory mounting for your ALEXA 35 cinema camera without blocking access to the camera's ports. The plate is hinged and provides up/down adjustment for the best position. Multiple 1/4"-20, 3/8"-16, and M4 threads are available to mount a variety of accessories such as wireless transmitters, extensions, or focus motors.

The compact, lightweight ARRI Compact Bridge Plate CBP-6 is designed for use with the ALEXA 35 cinema camera and provides a sliding bridge plate and a shoulder pad. The bridge plate mounts onto the BUD-1 utility dovetail, and its sliding function provides balance and support, especially when using long lenses. The quick release system has been improved from previous bridge plate models, and it also allows lifting the camera straight off the dovetail. It supports both 15mm LWS and 15mm studio rods as an option.

The ARRI Codex Compact Drive Dock uses a single Thunderbolt 3 interface to provide high-speed access to original camera data on your Compact Capture Drives when used with a Mac or Windows system. For Macs only, it also provides on-the-fly HDE (high-density encoding) of ARRIRAW footage when paired with the free Codex Device Manager software.

The Ratworks Alexa 35 Integrated Side Plate provides a highly rigid, planar mounting surface for accessories & can even be used to mount the camera in portrait mode in a pinch. The plate features a plethora of 3/8″ mounting holes with Arri Locking pins, 1/4in mounting holes & M4 mounting holes too. A large window provides comfortable access to the side user buttons.

This 2 Pin to DC power supply can connect to your Alpha Wheels, or compatible film equipment, to most standard worldwide AC power sockets.

Connect your MVF-2 viewfinder to your ALEXA 35 or ALEXA Mini LF cinema camera with this Cable VF Right Angle from ARRI. The cable features a right-angle connector on one end and measures 1.5' in length.

Camera Accessory Solutions' Spidergrips is a multi-functional, multi-modular handgrip system that can be mounted on either optional 15mm rods or 15mm LWS rods.

The Safest Standard from US Federal Agency OSHA, Unique UL number, Can be Verified Online. Heavy Duty 10 ft 10A amp Current, Real 18 Gauge Wire, Suitable for 3-prong 3-slot ICE C13 AC IN Electonic Device.

This 3.3" ARRI Swivel Antenna is for SMC-1, EMC-1, AMC-1, and UMC-4 motor controllers and all ALEXA Plus/Studio cameras. Also compatible with ALEXA Plus & Studio Cameras.

The ARRI SAM-5 Stabilizer Adapter Mount is a low profile dovetail used to mount an Alexa 35 Camera onto a MoVI Pro or MoVI M15 stabilizer.

The Wooden Camera A-Box for ALEXA Mini LF allows you to plug XLR audio sources into your ARRI ALEXA Mini LF camera body. The A-Box features two balanced, 3-pin XLR line-level inputs and one 6-pin LEMO-type output cable to connect to the ALEXA Mini LF.